Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0_BETA2 (INSTALL_LAPTOP) #0: Sun May 6 19:37:50 CDT 2007 jakllsch@santraginus.wlan.kollasch.net:/home/jakllsch/i386_nbsd40/obj/sys/arch/i386/compile/INSTALL_LAPTOP total memory = 1014 MB rbus: rbus_min_start set to 0x40000000 avail memory = 988 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xfdca4 pcibios_get_status: function not supported mainbus0 (root) pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c pci_addr_fixup: 004:04:0 0x104c 0x8039 new address 0x3f700000 cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium M (Yonah) (686-class), 1729.18 MHz, id 0x6ec cpu0: features bfe9fbff cpu0: features bfe9fbff cpu0: features bfe9fbff cpu0: features2 c189 cpu0: "Genuine Intel(R) CPU T2080 @ 1.73GHz" cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu0: using thermal monitor 1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x27a0 (rev. 0x03) agp at pchb0 not configured vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured vendor 0x8086 product 0x27d8 (multimedia subclass 0x03, revision 0x02) at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ath0 at pci2 dev 0 function 0 ath0: interrupting at irq 10 ath0: unable to attach hardware; HAL status 13 ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok pci_mem_find: void region pci_mem_find: void region pci_mem_find: void region re0 at pci3 dev 0 function 0pci_mem_find: void region : RealTek 8101E PCIe 10/100BaseTX re0: interrupting at irq 11 re0: Ethernet address 00:16:d4:97:2e:2a re0: using 256 tx descriptors rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02) uhci0: interrupting at irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02) uhci1: interrupting at irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02) uhci2: interrupting at irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02) uhci3: interrupting at irq 10 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02) ehci0: interrupting at irq 11 ehci0: BIOS refuses to give up ownership, using force ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled cbb0 at pci4 dev 4 function 0: vendor 0x104c product 0x8039 (rev. 0x00) cbb0: NOT USED because of unconfigured interrupt vendor 0x104c product 0x803a (Firewire serial bus, interface 0x10) at pci4 dev 4 function 1 not configured vendor 0x104c product 0x803b (miscellaneous mass storage) at pci4 dev 4 function 2 not configured vendor 0x104c product 0x803c (SD Host Controller system, interface 0x01) at pci4 dev 4 function 3 not configured pcib0 at pci0 dev 31 function 0 pcib0: vendor 0x8086 product 0x27b9 (rev. 0x02) piixide0 at pci0 dev 31 function 2 piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at irq 15 atabus1 at piixide0 channel 1 vendor 0x8086 product 0x27da (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 attimer0 at isa0 port 0x40-0x43: AT Timer pcppi0 at isa0 port 0x61 sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff npx0: reported by CPUID; using exception 16 pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq pcic0: controller 0 (Intel 82365SL-DF) has sockets A and B pcic0: controller 1 (Intel 82365SL-DF) has sockets A and B pcmcia0 at pcic0 controller 0 socket 0 pcmcia1 at pcic0 controller 0 socket 1 pcmcia2 at pcic0 controller 1 socket 0 pcmcia3 at pcic0 controller 1 socket 1 pcppi0: attached to attimer0 isapnp0: no ISA Plug 'n Play devices found timecounter: Timecounter "TSC" frequency 1729160810 Hz quality 800 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 pcic0: controller 0 detecting irqs with mask 0xde18: none pcic0: controller 1 detecting irqs with mask 0xde18: none pcic0: no available irq; polling for socket events md0: internal 5000 KB image area umass0 at uhub4 port 5 configuration 1 interface 0 umass0: vendor 0x0930 USB Flash Memory, rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <, USB Flash Memory, 1.00> disk removable sd0: fabricating a geometry sd0: 962 MB, 962 cyl, 64 head, 32 sec, 512 bytes/sect x 1970176 sectors wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) sd0: fabricating a geometry boot device: sd0 root on md0a dumps on md0b root file system type: ffs warning: no /dev/console