Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0_BETA2 (SIWENNA) #2: Thu May 10 15:44:16 UTC 2007 root@siwenna.wlan.kollasch.net:/usr/src/sys/arch/i386/compile/SIWENNA total memory = 1014 MB rbus: rbus_min_start set to 0x40000000 avail memory = 988 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xfdca4 pcibios_get_status: function not supported mainbus0 (root) pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c pci_addr_fixup: 004:04:0 0x104c 0x8039 new address 0x3f700000 cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel Pentium M (Yonah) (686-class), 1729.13 MHz, id 0x6ec cpu0: features bfe9fbff cpu0: features bfe9fbff cpu0: features bfe9fbff cpu0: features2 c189 cpu0: "Genuine Intel(R) CPU T2080 @ 1.73GHz" cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu0: using thermal monitor 1 cpu0: Enhanced SpeedStep (1340 mV) 1733 MHz cpu0: unknown Enhanced SpeedStep CPU. cpu0: using only highest and lowest power states. cpu0: Enhanced SpeedStep frequencies available (MHz): 1733 800 cpu0: calibrating local timer cpu0: apic clock running at 132 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: starting cpu1: Intel Pentium M (Yonah) (686-class), 1729.00 MHz, id 0x6ec cpu1: features bfe9fbff cpu1: features bfe9fbff cpu1: features bfe9fbff cpu1: features2 c189 cpu1: "Genuine Intel(R) CPU T2080 @ 1.73GHz" cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu1: using thermal monitor 1 ioapic0 at mainbus0 apid 1 (I/O APIC) ioapic0: pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2 ioapic0: remapped to apic 1 acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId < LTP,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (PNP0C0C): ACPI Power Button PNP0A08 at acpi0 not configured PNP0C02 at acpi0 not configured acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller acpiec0: io 0x62,0x66 PNP0200 at acpi0 not configured INT0800 at acpi0 not configured PNP0103 at acpi0 not configured PNP0000 at acpi0 not configured PNP0C04 at acpi0 not configured PNP0C02 at acpi0 not configured PNP0B00 at acpi0 not configured PNP0100 at acpi0 not configured PNP0A05 at acpi0 not configured acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method) PNP0303 at acpi0 not configured SYN0704 at acpi0 not configured TOS1900 at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 acpiacad0: AC adapter online. acpiec0: EcRead: timeout waiting for EC to send data ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for [EmbeddedControl] [20060217] ACPI Exception (dswexec-0568): AE_ERROR, While resolving operands for [AE_NOT_CONFIGURED] [20060217] ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BIF] (Node 0xc1d04240), AE_ERROR acpibat0: failed to evaluate _BIF: AE_ERROR pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03) agp0 at pchb0: detected 7932k stolen memory agp0: aperture at 0xc0000000, size 0x10000000 vga0 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device (rev. 0x03) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 22 (irq 11) azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2) azalia0: host: High Definition Audio rev. 1.0 ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ath0 at pci2 dev 0 function 0 ath0: interrupting at ioapic0 pin 17 (irq 10) ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 10.0 phy 6.1 radio 10.2 ppb2 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok pci_mem_find: void region pci_mem_find: void region pci_mem_find: void region re0 at pci3 dev 0 function 0pci_mem_find: void region : RealTek 8101E PCIe 10/100BaseTX re0: interrupting at ioapic0 pin 18 (irq 11) re0: Ethernet address 00:16:d4:97:35:b0 re0: using 256 tx descriptors rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci0: interrupting at ioapic0 pin 23 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci1: interrupting at ioapic0 pin 19 (irq 11) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci2: interrupting at ioapic0 pin 18 (irq 11) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci3: interrupting at ioapic0 pin 16 (irq 10) usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02) ehci0: interrupting at ioapic0 pin 23 (irq 11) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled cbb0 at pci4 dev 4 function 0: Texas Instruments product 0x8039 (rev. 0x00) fwohci0 at pci4 dev 4 function 1: Texas Instruments product 0x803a (rev. 0x00) fwohci0: interrupting at ioapic0 pin 17 (irq 10) fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:73:a8:40:b0:24 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset Texas Instruments product 0x803b (miscellaneous mass storage) at pci4 dev 4 function 2 not configured sdhc0 at pci4 dev 4 function 3: ioapic0 pin 19 (irq 10) sdmmc0 at sdhc0 pci_mem_find: void region pci_mem_find: void region pci_mem_find: void region pci_mem_find: void region pci_mem_find: void region cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff cbb0: disabling socket new status 0xffffffff cbb0: interrupting at ioapic0 pin 16 (irq 255) cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 5 pcmcia0 at cardslot0 ichlpcib0 at pci0 dev 31 function 0 ichlpcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02) ichlpcib0: TCO (watchdog) timer configured. ichlpcib0: No SpeedStep piixide0 at pci0 dev 31 function 2 piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at piixide0 channel 1 Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured isa0 at ichlpcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pms0: Synaptics touchpad version 6.2 pms0: Palm detect, Multi-finger pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer0 at isa0 port 0x40-0x43: AT Timer pcppi0 at isa0 port 0x61 pcppi0: children must have an explicit unit midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff npx0: reported by CPUID; using exception 16 pcppi0: attached to attimer0 isapnp0: no ISA Plug 'n Play devices found ioapic0: enabling WARNING: Callback scheduled before sysmon task queue thread present. WARNING: Callback scheduled before sysmon task queue thread present. fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) ieee1394if0: bus manager 0 (me) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 azalia0: codec[0]: 0x10ec/0x0862 (rev. 0.1) azalia0: codec[0]: High Definition Audio rev. 1.0 azalia0: playback: max channels=2, encodings=1 azalia0: playback: PCM formats=e0160<24bit,20bit,16bit,96kHz,48kHz,44.1kHz> azalia0: recording: max channels=2, encodings=1 azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz> azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0) azalia0: codec[1]: High Definition Audio rev. 1.0 azalia0: codec[1]: No support for modem function groups azalia0: codec[1] has no audio function groups audio0 at azalia0: full duplex, independent Kernelized RAIDframe activated IPsec: Initialized Security Association Processing. wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs cpu1: CPU 1 running nnpfs (arla 0.44pre): protocol version 20, using cdev: 188, syscall: 210 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) atapibus1 at sdmmc0: 1 targets sd0 at atapibus1 drive 0: disk removable sdmmc_scsipi_xfer_control: SCSI MODE SENSE 6 with unsupported page (page=5) sd0(sdmmc0:0:0): generic HBA error sdmmc_scsipi_xfer_control: SCSI MODE SENSE 6 with unsupported page (page=5) sd0(sdmmc0:0:0): generic HBA error sd0: 241 MB, 1024 cyl, 128 head, 3 sec, 512 bytes/sect x 494080 sectors sdmmc_scsipi_xfer_control: SCSI MODE SENSE 6 with unsupported page (page=5) sd0(sdmmc0:0:0): generic HBA error sdmmc_scsipi_xfer_control: SCSI MODE SENSE 6 with unsupported page (page=5) sd0(sdmmc0:0:0): generic HBA error sd0 detached atapibus1 detached